<![CDATA[Initialising then error]]>Im having the same problem as above.
Initialising then error.

Please can someone assist

]]>https://beta-forums.sim-pli.city/topic/100/initialising-then-errorRSS for NodeMon, 25 May 2026 22:56:04 GMTSat, 25 Mar 2023 12:57:49 GMT60<![CDATA[Reply to Initialising then error on Tue, 28 Mar 2023 16:39:02 GMT]]>Thanks,

After reseating the plugs all seems fine again.

]]>https://beta-forums.sim-pli.city/post/538https://beta-forums.sim-pli.city/post/538Tue, 28 Mar 2023 16:39:02 GMT<![CDATA[Reply to Initialising then error on Mon, 27 Mar 2023 13:36:36 GMT]]>@JeanV78

The "Green Error" indicates USB communication with the controller is OK but data from the motor to the controller is outside expected limits. This is usually indicative of a cabling issue.

Can you

  • power down the unit
  • reseat the motor and encoder cables at both the controller & motor ends and try again?
  • If possible can you also take a video of the desktop app while the system is starting up to help identify the stage of the initialisation process at which the error is detected.
]]>https://beta-forums.sim-pli.city/post/535https://beta-forums.sim-pli.city/post/535Mon, 27 Mar 2023 13:36:36 GMT