<![CDATA[Raceroom june 13th update FFB problem]]>Hello . ( not sure If its all or specific wheel related issue so have opted for the latter in post )

Hardware / firmware SW20v3 /21.07.04
Game Raceroom racing experience.
installer package 21.07.04 .

Since June 13th update I have been unable to use Sim mode for the game.

Problem in Sim mode : Left to right / Right to left centre threshold "Snap" as if I had inverted FFB. Snapping force circa 60% of what ever Nm I set

Ive tried deletion of simbin folder and reload of rcs file / installer package And numerous extreme Simplicity settings all have same issue. all have not removed the issue
R3e patch has seemingly broken the installer set up. they mention a min force change in patch notes (side note looks like the Moza R9 have also had inverted force issues.)

Any advice you can offer would be appreciated.

Regards

Ochso

]]>https://beta-forums.sim-pli.city/topic/106/raceroom-june-13th-update-ffb-problemRSS for NodeMon, 25 May 2026 23:02:56 GMTSat, 24 Jun 2023 20:10:58 GMT60<![CDATA[Reply to Raceroom june 13th update FFB problem on Mon, 18 Sep 2023 13:32:05 GMT]]>@lokcy

Thanks for the update. It does appear the new version does not agree with supporting files from the previous versions.
We'll take a look at the Presets Installer to see if it is still required /relevant to the new version.

]]>https://beta-forums.sim-pli.city/post/606https://beta-forums.sim-pli.city/post/606Mon, 18 Sep 2023 13:32:05 GMT<![CDATA[Reply to Raceroom june 13th update FFB problem on Wed, 13 Sep 2023 07:48:21 GMT]]>@Sim-plicity-Dev
hello, to keep you informed, actually reinstalling the game and deleting the remaining folders seems to have solved the problem.. haaaa r3e 🙄😨
Lol

]]>https://beta-forums.sim-pli.city/post/601https://beta-forums.sim-pli.city/post/601Wed, 13 Sep 2023 07:48:21 GMT<![CDATA[Reply to Raceroom june 13th update FFB problem on Tue, 12 Sep 2023 20:30:13 GMT]]>@Ochso @Sim-plicity-Dev

Hello
after a long time without a raceroom this evening the same on the track it jerks towards the left by 90 degrees even when stopped all the other simulations work very well I tried the inversion but that's not it I uninstalled the game and deleted the files that were lying around and I will test that tomorrow

]]>https://beta-forums.sim-pli.city/post/598https://beta-forums.sim-pli.city/post/598Tue, 12 Sep 2023 20:30:13 GMT<![CDATA[Reply to Raceroom june 13th update FFB problem on Sun, 02 Jul 2023 10:58:13 GMT]]>Eventually had the time to do a complete clean installation of the game. ( Blame a slow interweb and definitive lack of time)
Adding I had tried verification several times without it finding any corruptions.

I did not apply the launcher software : ( A control experiment if you will)

No more snap in Sim mode. So I will not apply it for now unless something crops up.

I will ( Time permitting) compare the differing Wheelcontroller .rcs files I have accumulated over time to see the difference in the older versions compared to the new as there must be a snippet as to why the snap occured ..

But that is for a later date.

Thank you for your time hopefully the matter is resolved ( fingers crossed)

Regards

Ochso

]]>https://beta-forums.sim-pli.city/post/584https://beta-forums.sim-pli.city/post/584Sun, 02 Jul 2023 10:58:13 GMT<![CDATA[Reply to Raceroom june 13th update FFB problem on Thu, 29 Jun 2023 13:04:18 GMT]]>@Sim-plicity-Dev
HI thanks for the reply .

Unfortunately I dont use any of r3e canned effects so they are always zero. But I double checked just to be sure.

I made a short video of the snap effect with all other devices ( sim rig , button box pedals etc) not attached and the ffb meter running the snap is visible as the loads switch from left to right at the centre
https://youtu.be/nUFkCrj4OEc

This has only presented to R3e in Sim mode ( Game mode no issue ) every other sim runs fine. and only since the set of updates since 13th. ( last time I had played it was 12th - sods law in action regarding pinpointing the exact patch)

Forgot to mention my OS which is Win 10 Pro 22H2 (all up to date)
Next up is a complete re install of r3e just in case the new Steam ui is not verifying properly.
And drop a forum question to KW just in case there are simmilarities to the R9 inversion issue..

Regards
Ochso

]]>https://beta-forums.sim-pli.city/post/583https://beta-forums.sim-pli.city/post/583Thu, 29 Jun 2023 13:04:18 GMT<![CDATA[Reply to Raceroom june 13th update FFB problem on Thu, 29 Jun 2023 06:58:57 GMT]]>@Ochso

We've had a look at this and the cause appears to be the Gearshift Effects within R3E
978ae825-f260-40d3-b530-680c95032ded-image.png

Setting the value to 0 eliminates the behaviour without making any other changes.

Can you try that and let us know the result?

]]>https://beta-forums.sim-pli.city/post/582https://beta-forums.sim-pli.city/post/582Thu, 29 Jun 2023 06:58:57 GMT