@miky-miky

The binaries should be up by the end of next week

FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad.
FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.
FFB Gain="0.46000" // Strength of Force Feedback effects.  Range 0.0 to 1.0.
FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
FFB steer vibe freq mult="1.00000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.
FFB steer vibe zero magnitude="0.01000" // Magnitude of steering vibration at 0mph (reference point).
FFB steer vibe slope="0.00300" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB steer force average weight="1.00000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.
FFB steer force exponent="1.00000" // Steering force output "sensitivity".  Range 0.0 to infinity.  0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
FFB steer force input max="11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).
FFB steer force output max="1.70000" // Maximum force output of steering force, recommendation 0.8 to 2.0
FFB steer force grip weight="0.80000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9.  How much weight is given to tire grip when calculating steering force.
FFB steer force grip factor="0.60000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6.  How much of a factor the front wheel grip is on the steering weight.
FFB steer update thresh="0.00000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.
FFB steer friction coefficient="0.10000" // Coefficient to use for steering friction.  Range: -1.0 to 1.0
FFB steer friction saturation="1.00000" // Saturation value to use for steering friction.  Range: 0 - 1.0
FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper.  Range: -1.0 to 1.0
FFB steer damper saturation="1.00000" // Saturation value to use for steering damper.  Range: 0 - 1.0
FFB throttle vibe freq mult="0.60000" // Scales actual engine frequency to force FFB vibration frequency.  Suggested range: 0.10 to 0.50
FFB throttle vibe zero magnitude="0.02000" // Magnitude of engine vibration at 0rpm (reference point).
FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB throttle vibe update thresh="0.08000" // Amount of change required to update throttle vibe (0.0 - 1.0)
FFB brake vibe freq mult="0.10000" // Scales actual brake rotational frequency to force feedback vibration frequency.
FFB brake vibe zero magnitude="0.10000" // Magnitude of brake vibration at 0mph (reference point).
FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).
FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB brake vibe update thresh="0.05000" // Amount of change required to update brake vibe (0.0 to 1.0)
FFB rumble strip magnitude="0.27000" // How strong the rumble strip rumble is.  Range 0.0 to 1.0, 0.0 disables effect.
FFB rumble strip freq mult="0.60000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.
FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB rumble strip pull factor="0.30000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
FFB rumble strip update thresh="0.07500" // Amount of change required to update rumble strip effect (0.0 - 1.0)
FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are.  Suggested Range: -2.0 to 2.0.

thank you

@byagm extra info:
Startup setup can be saved but it doesnt show the parameters in "preview" until you restart the app.

Wich cannot be saved is the "game mode" as default, so I must open the app everytime I want to play.

Thanks for the suggestions, they are scheduled for inclusion in v21.07.04 (v21.07.03 is an Esport only release)

Thanks for confirming "Game Mode" better supports GT Legends.

We'll look into the crash issue and try to replicate it. Can you post your current PLR file?

Wich cannot be saved is the "game mode" as default, so I must open the app everytime I want to play.

The bug about the crashes happens with walls too. Even with hard kerbs. Wheel goes left and wants to keep there with the force has been atacked in that Kerb/wall/car. FFB keeps working but with an extra high force to the left.

https://www.youtube.com/watch?v=tc-QIFbXxlA

https://www.youtube.com/watch?v=dGu4OB6e-y0

I know that its not normal to have that crashes but in case I have the wheel gets stuck.
All this in "game mode" (Sim mode doesnt even recognize the wheelbase.

@ecky

Is the Base Driver Package installed?
The error messages point to its dlls not being found.
Try re-running as Administrator.

Indeed, the driver was missing. Thank you for pointing this out! I definitely did not remove the driver myself. But there were some updates I installed recently. Maybe this was causing the driver removal.
Anyway, thank you very much!

BR

Is the Base Driver Package installed?
The error messages point to its dlls not being found.
Try re-running as Administrator.

has anyone else problems to open the control software recently?
If I try to open it i get two errors in the logs:

1. .NET Runtime error stating an System.IO.FileNotFoundException in bei Compact.frmMain..ctor(System.String[]) and Compact.Program.Main(System.String[])
2. Application Error for C:\Program Files\Sim-plicity\SW10C\SW10 Compact.exe Path to faulty module: C:\WINDOWS\System32\KERNELBASE.dll

I run Windows 10 Pro with the 21H2 upgrade.

iRacing is fine in "Sim Mode". Changing to "Game Mode" is only for titles that don't work properly in "Sim Mode".
"Game Mode" is a stripped down implementation and will typically only be needed for compatibility reasons.

I only play iracing, do i need to change or usb mode?