<![CDATA[Automobilista 2]]>I cant get the FFB to work on here.
Once the game goes to track it pulls to th left with a lot of force and stays hard on the bump stops.

Anyone have anything that I can try?

SW25

]]>https://beta-forums.sim-pli.city/topic/34/automobilista-2RSS for NodeMon, 25 May 2026 23:06:03 GMTTue, 07 Dec 2021 10:38:03 GMT60<![CDATA[Reply to Automobilista 2 on Fri, 03 Jan 2025 10:28:31 GMT]]>@Sim-plicity-Dev So, try as I might I've been unable to reproduce the problem the last 2 days. Thank you for explaining the technical details, that stuff is always interesting.

I'll get the screenshots whenever I encounter the issue again, but I can answer the question; yes, the wheel remains bumping into the endstop until I switch USB mode from game to sim and/or back. Exiting the game doesn't help. I am using an external, powered USB hub to connect the devices on my rig to the PC.

@Ochso I have also found that sim mode works just as good as game mode, but in the interest of clarity I'm only using game mode as per the instructions.

]]>https://beta-forums.sim-pli.city/post/670https://beta-forums.sim-pli.city/post/670Fri, 03 Jan 2025 10:28:31 GMT<![CDATA[Reply to Automobilista 2 on Thu, 02 Jan 2025 13:59:07 GMT]]>No doubt Ill be muddying the waters. Thus apologies in advance
and please ignore if irrelevant.

I have not had LR snapping on my SW20v3 in AMS2 ( Checked last night for a couple of hours .
I use a dedicated usb 2 header from my mobo so its un contested and use also use Sim mode for the game with circa 15Nm - 17Nm) settings. ( iirc usually USB modes 2-5 depending on vehicle)
I also only used Default or Default + . I did become tired of chasing custom ffb file downloads as for me they always seemed to fade in efficacy on new updates.

Hope it helps even if for just elimination purposes

Good luck hope you get what ever it is sorted

]]>https://beta-forums.sim-pli.city/post/669https://beta-forums.sim-pli.city/post/669Thu, 02 Jan 2025 13:59:07 GMT<![CDATA[Reply to Automobilista 2 on Tue, 31 Dec 2024 10:00:41 GMT]]>@loermansa

The windows USB disconnect & reconnect you hear is the wheelbase attempting to recover from a monitored instability on the USB bus.

This is programmed into the firmware if a certain % of heartbeats between the PC & wheelbase fail within a defined period. It seeks to highlight USB issues rather than being the cause.

Can you post screenshots of your Telemetry page whilst in AMS2. One screenshot after you exit the garage and another after the issue occurs.

Do not switch USB modes before taking the 2nd screenshot.

Further question, when the hard left or right occurs, does the wheel remain at full power (pushing against the endstops) after the disconnect/reconnect?

]]>https://beta-forums.sim-pli.city/post/668https://beta-forums.sim-pli.city/post/668Tue, 31 Dec 2024 10:00:41 GMT<![CDATA[Reply to Automobilista 2 on Mon, 30 Dec 2024 18:48:53 GMT]]>@Sim-plicity-Dev I think that what I am experiencing is different, it's not a short glitch in the feedback and being able to continue. The wheel turns left or right and stays there. The game doesn't recognise any wheel input after that and I have to shut down the game, reset the wheelbase (toggle between game mode and sim mode) for the wheel to start working again. I also hear the windows sound that a usb device disconnects and reconnects when this issue happens.

I can drive longer without problems if I lower the torque setting in control panel, but that kind of defeats the purpose of having this wheelbase.

]]>https://beta-forums.sim-pli.city/post/667https://beta-forums.sim-pli.city/post/667Mon, 30 Dec 2024 18:48:53 GMT<![CDATA[Reply to Automobilista 2 on Mon, 30 Dec 2024 13:24:31 GMT]]>@loermansa

There appears to be a long standing issue in AMS2 that seems like what you are experiencing

https://forum.reizastudios.com/threads/steering-wheel-turning-completely-to-the-right-in-some-cars.11468/
https://forum.reizastudios.com/threads/random-left-pull-on-the-steering.30498/
https://forum.reizastudios.com/threads/wheel-hard-pulling-to-the-right-multiple-users-affected.14582/

These have occurred across multiple manufacturer wheelbases with reports as recently as November 2024.

Not sure why it happens but it does appear to be a sim side issue.

]]>https://beta-forums.sim-pli.city/post/666https://beta-forums.sim-pli.city/post/666Mon, 30 Dec 2024 13:24:31 GMT<![CDATA[Reply to Automobilista 2 on Sat, 28 Dec 2024 13:41:24 GMT]]>I know this is an old thread, but I just bought AMS 2 in the Steam Wintersale and am having problems getting the wheelbase (SW20 V3) to work reliably. I'm running the wheel in Game mode as per the instructions, firmware 21.07.05 and sometimes it works fine. But it seems that whenever there is a spike in Force Feedback the wheel turns left with maximum force (as set ingame) and the game does not respond to the wheel after that. When it happens I also hear the windows sound that a USB device disconnects and reconnects, so I'm assuming this has something to do with the driver or firmware. I have to go into the Sim-plicity control program and change the USB mode to sim and back again to get it to work normally again.

Is anybody else experiencing the same?

I'll also ask support directly since these forums get very few visitors it seems.

Arjan

]]>https://beta-forums.sim-pli.city/post/665https://beta-forums.sim-pli.city/post/665Sat, 28 Dec 2024 13:41:24 GMT<![CDATA[Reply to Automobilista 2 on Sat, 23 Jul 2022 16:49:38 GMT]]>@sim-plicity-dev, Thank you for explaining!

]]>https://beta-forums.sim-pli.city/post/357https://beta-forums.sim-pli.city/post/357Sat, 23 Jul 2022 16:49:38 GMT<![CDATA[Reply to Automobilista 2 on Mon, 18 Jul 2022 10:07:57 GMT]]>@cpitt001

This is a beta feature introduced in v21.07.xx. You would need to upgrade to v21.07.04 to use this

Run the installer with the wheelbase connected via USB and powered on then follow the on-screen prompts

Once upgraded
In the "Advanced" tab of your desktop app, change the USB Mode drop-down from Sim to Game and click "Set Mode"

]]>https://beta-forums.sim-pli.city/post/352https://beta-forums.sim-pli.city/post/352Mon, 18 Jul 2022 10:07:57 GMT<![CDATA[Reply to Automobilista 2 on Sun, 17 Jul 2022 15:15:28 GMT]]>@sim-plicity-dev , hi, tell me please how switch from "USB Mode" to "Game Mode"?
Thank you,
Kind regards.

]]>https://beta-forums.sim-pli.city/post/351https://beta-forums.sim-pli.city/post/351Sun, 17 Jul 2022 15:15:28 GMT<![CDATA[Reply to Automobilista 2 on Sun, 17 Jul 2022 15:12:18 GMT]]>@thedozyone , hi, tell me. please how to change in game mode?
Thank you!

]]>https://beta-forums.sim-pli.city/post/350https://beta-forums.sim-pli.city/post/350Sun, 17 Jul 2022 15:12:18 GMT<![CDATA[Reply to Automobilista 2 on Sat, 19 Feb 2022 22:53:50 GMT]]>@grguthrey

I think there was a guide on the FB group on how to re calibrate but for me it now works fine when in game mode.

]]>https://beta-forums.sim-pli.city/post/291https://beta-forums.sim-pli.city/post/291Sat, 19 Feb 2022 22:53:50 GMT<![CDATA[Reply to Automobilista 2 on Sat, 19 Feb 2022 21:40:28 GMT]]>@thedozyone Hi guys is still broken on automobilist 2.
I'm also having issues with the force feedback the wheel just goes to the left violently.
I'm running v21.07.02

]]>https://beta-forums.sim-pli.city/post/290https://beta-forums.sim-pli.city/post/290Sat, 19 Feb 2022 21:40:28 GMT<![CDATA[Reply to Automobilista 2 on Mon, 03 Jan 2022 15:43:30 GMT]]>I just tried this with "Game mode" It didn't wrench the steering wheel....but that's because there was no FFB. AMS2 worked well with a previous firmware.

]]>https://beta-forums.sim-pli.city/post/246https://beta-forums.sim-pli.city/post/246Mon, 03 Jan 2022 15:43:30 GMT<![CDATA[Reply to Automobilista 2 on Fri, 17 Dec 2021 18:39:56 GMT]]>We're looking into this. If you are running v21.07.02, switch to "Game Mode" to avoid this issue.

]]>https://beta-forums.sim-pli.city/post/230https://beta-forums.sim-pli.city/post/230Fri, 17 Dec 2021 18:39:56 GMT<![CDATA[Reply to Automobilista 2 on Fri, 17 Dec 2021 10:40:34 GMT]]>@thedozyone said in Automobilista 2:

@jeanv78 This is what I get in AMS2.

https://youtu.be/n4O1BGkiCGc

Is that the same issue you get? I wonder if the USB mode would help here?

Not the same. Mine spins to the left and stays on the bump stop with the full force.

]]>https://beta-forums.sim-pli.city/post/229https://beta-forums.sim-pli.city/post/229Fri, 17 Dec 2021 10:40:34 GMT<![CDATA[Reply to Automobilista 2 on Tue, 14 Dec 2021 23:13:07 GMT]]>Maybe try to invert the feedback as this happened to me in RF2

]]>https://beta-forums.sim-pli.city/post/222https://beta-forums.sim-pli.city/post/222Tue, 14 Dec 2021 23:13:07 GMT<![CDATA[Reply to Automobilista 2 on Tue, 14 Dec 2021 15:08:10 GMT]]>@jeanv78 This is what I get in AMS2.

https://youtu.be/n4O1BGkiCGc

Is that the same issue you get? I wonder if the USB mode would help here?

]]>https://beta-forums.sim-pli.city/post/219https://beta-forums.sim-pli.city/post/219Tue, 14 Dec 2021 15:08:10 GMT