v21.02.06 Discussion Thread
-
@Sim-plicity-Dev any reason why on the new firmware oscillations very hard to tune out, on old 19.08.01 fimrware i rand 1.25 weight and had no oscillation when letting go of the wheel on the straights in iracing, now i cannot let go of wheel. I cannot turn weight up more than 0.50 otherwise i get sandy grainy feel, do i need to have controller mode up way higher? or do i need weighted center? my above settings feel goodand actually better overall but wheel is too lively on straights.
-
Just download and install the new firmware. It feels really good super impressed but was wondering.
My virtual torque setting is at 20.00NM at default and can't go any lower.
Is that the same with everyone else?If it is the default setting is it adding the new effect if kept at 20.00NM?
-
@grguthrey I forgot to mention SW20 V3 and my torque set at 20.00NM
-
"Virtual Torque" cannot be set below the "Torque" value. It is indexed to "Torque" and once set will rise and fall proportionally with "Torque" changes.
-
From your description the "Weight" value is too low for the car & track combination.
When optimizing for a specific car & track, you should set the "Weight" value to your ideal first (fingertip steering down a straight, not jerky out of corners), then adjust other values to reflect/improve. -
@all
As no release-specific issues have been raised. v21.02.06 will be promoted to "Beta" on Monday 11th of October. -
@sim-plicity-dev Gen 1 Lite - Due Sep 2021
Gen 1 Plus - Due Oct 2021Will people with SW20 and SW25 be able to upgrade there control units?
-
The new controllers will come in multiple configurations
- board only
- encased board with external desktop PSU (supplied or purchased from 3rd party)
- encased board with internal integrated PSU
Any of the existing wheelbases can be upgraded by selecting an appropriate configuration.
There will be a "Configuration Helper" tool available on release to aid the selection process.
-
@sim-plicity-dev okay this sounds great! look forward to it!
-
I finally upgraded my SW20v3 from v20.11.00 to v21.02.06
Works perfect, cant feel any difference from v20.11.00.
Using Rfactor2. -
Is it possible to install this on my SW10C?
-
@presha have you looked here:
https://github.com/sim-plicity/SW-firmware-alpha/releases/tag/v21.02.06
Its the first link in this thread. -
Hi,
I'm just curious what you are looking for regarding feedback?
Are there any specific things sim-plicity devs are interested in?
What about the progress for the beta fw? Is it delayed because of too little feedback from alpha testers?BR
-
@tjohansen thanks!!
-
Any & all feedback is welcome.
Too little (or no) feedback is still useful as it indicates sufficient stability to promote the release to the next level unchanged.
This is the case with v21.02.06 which is now "Beta".We expect v21.07.01 to replace it as the latest "Alpha" release on Monday 8th of November
-
Will this firmware work ok with a SW13c+ ?
Last time I upgraded (V21.02.05) it didn't work well
-
@sim-plicity-dev new firmware delayed? and what is happening with new controllers?
-
no new updates?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login